Over the years, as we have gained extensive experience chocking installations, we have compiled a range of effective tools for damming the surface to be grouted. For this purpose, we offer rubber strips in various sizes, rubber sleeves (for protecting anchor bolts, for example) and metal strips for fast and precise formwork construction.

Mould Release Spray is a quick, clean, easy release agent for most types of plastics, rubbers and epoxy resins from forms, moulds, dies, rollers and presses.

Description and application
This PFTE-based Mould Release Spray can be used up to temperatures of 270 °C. Parts that should not bond to the epoxy can be easily sprayed with Mould Release Spray. This product does not contain silicones. When the layer is dry, the surface can simply be coated or imprinted, if necessary.

Marine Grease EP 2/3 is a multi-purpose grease, which, due to its unique composition, is resistant to temperatures ranging from -18 to 288 °C.

Description and application
Because synthetic resin does not adhere, Marine Grease EP 2/3 is used, for example, to coat adjustment bolts, and to grease formwork and other parts that should not be bonded to the epoxy. Naturally, the lubricating properties ensure excellent passage of the resin when filling holes through rubber plugs or wooden filling sticks. This type of grease comes in cans with a net content of 500 grams

Vibrox is a special two-component epoxy grouting compound that is particularly suitable for chocking machines and structural parts, supporting soleplates and levelling structural parts.

Description and application
Curing is at least three times faster than with a cementitious grout, and the epoxy is non-shrinking. Gietbrox has a very low viscosity and is therefore suitable for filling spaces that other epoxy grouts cannot reach. After curing, the resulting surface is uniquely smooth. This grout is therefore also often used as a sealing top layer.

EMHA INJ is a pure synthetic resin with very low viscosity, developed for injection into horizontal and vertical cracks in structures.

Description and application
Due to its very high bonding strength to concrete (stronger than the concrete itself), structural bonding between concrete parts can be achieved to repair complete structures. EMHA INJ is resistant to oil, grease, lubricants, petrol, solvents, aggressive gases, acid solutions and more.

The Glassfiber Tape from EMHA is suitable for all kinds of repairs and protection based on glass fibre. Glastape does not have a self-adhesive layer, but is rather used in combination with epoxy.

Description and application
The tape can be used, for example, in combination with Phillyclad 1775 as propeller shaft coating or in combination with Phillyclad 8 for pipe repair. The 280 g/m2 tape is supplied on 100-metre rolls and is available in widths of 25, 50, 80 and 100 mm.

To ensure a high mixing quality of the epoxy resin and to minimise costs and environmental impact, we supply high quality, reusable stainless steel mixers for mixing our synthetic resins.

Description and application
Our mixers differ from a standard mixer by having an extra rim at the bottom to prevent damage to the packaging of the product to be mixed. The top is also fitted with a ‘wing’ that prevents air from entering the mixture. Because this mixer is made of stainless steel, a good service life is guaranteed and the mixer can be used again after cleaning.

Would you like more information about all types of assembly bolts from EMHA? Contact us by email or phone.

EMHA’s unique SW strain gauges combine the functionality of a standard strain gauge with the properties of a spherical ring. While the length of the bush ensures sufficient elongation in the bolt, the spherical surfaces compensate for any misalignment up to a maximum of 4°.

Description and application
The bushes have a standard length of 60 mm, but other lengths are available on request. It is normally necessary to reduce the bolt torque when using a spherical ring. However, the unique design of the EMHA SW strain gauges makes this unnecessary, so the full torque can be used.

EMHA’s shim cases can be filled with three different modules, in sizes A, B, C and D.

EMHA filling pipes are specially manufactured to optimise the chocking of installations without overpour. Because the height of the pipes is utilised, sufficient pressure can be built up to allow the synthetic resin to flow to all parts to be chocked.

Description and application
The pipes can be used to reach hard-to-reach places. They are easy to attach. Depending on the application, the filling pipes are supplied with horizontal or vertical flow. Ask our technical specialists for the best solution for your application.

EMHA’s robust steel sea fastening bars are reliable tools for securing marine engines, gearboxes and bearing blocks. These sea fastenings ensure that thermal expansion is directed in the desired direction and also prevent displacement of machine parts as the result of impact, from a collision for example.

Description and application
The sea fastenings are available from stock in left- and right-hand versions and in three standard sizes. Naturally, other sizes are also available on request. Ask our technical specialists about the best solution for your situation.